217 varistors ma3z030 series (ma30 series ) silicon epitaxial planar type variable resistor for reduced voltage and temperature compensation features ? s-mini type package, allowing high-density mounting ? extremely small reverse current i r ? large p ower dissipation p d ? wide forward voltage v f range absolute maximum ratings t a = 25 c unit : mm parameter symbol conditions min typ max unit reverse current (dc) i r v r = 6 v 1 a forward voltage MA3Z0300A v f1 i f = 1.5 ma 0.56 0.61 v (dc) ma3z0300b 0.59 0.64 ma3z030wa/wb i f = 10 a 0.77 forward voltage ma3z030wa v f2 i f = 3 ma 1.18 1.28 v (dc) ma3z030wb 1.26 1.36 temperature coefficient MA3Z0300A/b ?? v f / ? ti f = 1.5 ma 2 mv/ c of forward voltage * ma3z030wa/wb i f = 3 ma 4.6 electrical characteristics t a = 25 c note) 1. rated input/output frequency: 100 mhz 2. * : t j = 25 c to 125 c parameter symbol rating unit reverse voltage (dc) v r 6v forward MA3Z0300A/b i fm 150 ma current (dc) ma3z030wa/wb 100 power dissipation p d 100 mw junction temperature t j 125 c storage temperature t stg ? 55 to + 125 c marking symbol ? MA3Z0300A: 3a ? ma3z0300b: 3b ? ma3z030wa: 3c ? ma3z030wb: 3d 5 5 1.25 0.1 0.7 0.1 2.5 0.2 1.7 0.1 0.4 0.1 0 to 0.1 (0.15) 0.16 0.5 0.1 1 2 +0.1 ? 0.06 0.35 0.1 0 to 0.1 1: anode 2: cathode smini2-f1 package note) the part numbers in the parenthesis show conventional part number.
varistors 218 ma3z030 series i f ? v f v f ? t a i f ? v f v f ? t a characteristics charts of ma3z030w 0 ? 40 0 80 120 40 0.2 0.4 0.6 0.8 ambient temperature t a ( c ) forward voltage v f ( v ) MA3Z0300A ma3z0300b i f = 1.5 ma 10 ? 2 0 0.4 0.8 1.2 1.6 2.0 10 ? 1 1 10 10 2 forward voltage v f ( v ) forward current i f ( ma ) ma3z030wa ma3z030wb 0 ? 40 0 80 120 40 0.5 1.0 1.5 2.0 ambient temperature t a ( c ) forward voltage v f ( v ) i f = 3 ma ma3z030wa ma3z030wb 10 ? 2 0 0.2 0.4 0.6 0.8 1.0 10 ? 1 1 10 10 2 forward voltage v f ( v ) forward current i f ( ma ) MA3Z0300A ma3z0300b t a = 25 c characteristics charts of ma3z030
please read the following notes before using the datasheets a. these materials are intended as a reference to assist customers with the selection of panasonic semiconductor products best suited to their applications. due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. b. panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. therefore, panasonic will not assume any liability for any damages arising from any errors etc. that may ap- pear in this material. c. these materials are solely intended for a customer's individual use. therefore, without the prior written approval of panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the internet or in any other way, is prohibited. request for your special attention and precautions in using the technical information and semiconductors described in this material (1) an export permit needs to be obtained from the competent authorities of the japanese govern- ment if any of the products or technologies described in this material and controlled under the "foreign exchange and foreign trade law" is to be exported or taken out of japan. (2) the technical information described in this material is limited to showing representative character- istics and applied circuit examples of the products. it does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) the products described in this material are intended to be used for standard applications or gen- eral electronic equipment (such as office equipment, communications equipment, measuring in- struments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. at the final stage of your design, purchas- ing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the guaranteed values, in particular those of maxi- mum rating, the range of operating power supply voltage and heat radiation characteristics. other- wise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) when using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) no part of this material may be reprinted or reproduced by any means without written permission from our company. 2001 mar
|
